[問題]有關amp line out的用法

misolsi · Unread post by **misolsi** » 2008-02-10, 01:33

請問閃大,像有些head沒有reverb,也沒有effect loop,不過有line out,我查了一下,有一種叫做line out wet/dry setup,這是怎麼一回事?我看的還是霧煞煞 (ku6)

http://mojaveampworks.com/index.php?id=10,0,0,1,0,0

這是他的說明~~
The adjustable Line output is also equipped with a ground lift, selected via a push-pull knob, to avoid any ground loops that might occur from direct connections with external equipment. Line outs serve as an excellent source for collecting the amplifiers sound as a whole without microphone or speaker interaction. The tone is also inclusive of the power tubes and output transformer. By using the line level output the guitar amplifier signal can be sent directly to a live board, recording device, effects processor and amplified separately allowing wet/dry setups.

Unread post by **閃電手** » 2008-02-10, 08:25

一般Amp的Line out通常是等於前級的最後訊號, 要進後級的, 讓你外接東西, 例如再進
另一組後級+喇叭, 但以前沒有Cab Simulation技術前, 很多就是這Line out當direct進
mixer, 再用EQ去修

但他這個牌的Line out照他講是有包括後級的, 為的是要後級管產聲的Tone也包括,
但他應是把訊號降到Line level, 就跟一般的Line out是同阻抗值了, 那個鈕應也是可以調
Line Level的強度

misolsi · Unread post by **misolsi** » 2008-02-10, 11:30

所以如果要接effect,就應該是
Line out-->efx--->power amp-->cab
如是這樣,不就很浪費原本head後級的設計.

Unread post by **閃電手** » 2008-02-10, 13:46

我也覺得他這想法並不完美, 他這樣是要連後級管的音色影響都包括, 但對direct進mixer來說,
還欠缺cab的音色影響, 所以若有加上Cab simulation那才是正確

misolsi · Unread post by **misolsi** » 2008-02-11, 16:48

這感覺比較像給studio用的amp,什麼都沒有.沒有effect loop,也沒有reverb,會影響音色的都拿掉了,錄進去再用efx處理.
真是什麼amp都有人做.